HI FELLOWS, I HAVE THREE SET'S OF ATLAS TRACK ON A PLYWOOD TABLE. THE OUTER MOST TRACK 54 THE MIDDLE IS 45 AND THE INNER TRACK 36. MY QUESTION I LIKE TO HAVE A SWITCH TRACK FROM THE OUTER TO THE MIDDLE. WHAT SWITCHER TRACK'S DO I BUY. TONY

Hi Anthony,

On the STRAIGHT portion of your layout, measure the distance between the center rail of the O54 loop to the center rail of the O45 loop. If your measurement is 4.2" (4-1/5) then use a pair of O54 switches back to back. If your measurement is 4.5" (4-1/2) then a pair of #5 switches should work. You will need to use two of the same type turnouts. (2 Rights or 2 Lefts) Once you install the new switches, you will need some small sections of straight track to fill in the gaps.

Atlas has some free downloadable software that will help you. Check it out here:

Atlas RightTrack Software

Good luck!

Elliot